Overview
A lightweight, anti-slump filler ideal for the repair of damaged plaster up to 50mm deep. Specially formulated to a light consistency that is shrink and crack resistant and easy to apply and smooth out for a ready to decorate finish.
- Light-weight formulation
- Shrink, crack and slump resistance
- Easily repairs damaged plaster
| Area | Interior |
| Recommended Use | Internal plaster, plasterboard and masonry |
| Drying Time | 24 Hours |
| Re-Coat Time | 24 Hours |
| Recommended Coats | 1 Coat |
| Application Method | Filling knife, trowel or float |
| VOC Levels | Minimal |
| Clean Up | Remove excess from tools before cleaning in warm water |
Preparation
Always ensure the surface to be filled is free from dirt and any contaminates that may affect adhesion.
- Ensure the surface and cracks are free from any loose material.
- Prime nails and screw heads with a suitable metal primer or oil-based paint.
- Rub down gloss surfaces with fine grit sandpaper
Application
Always follow the manufacturer's instructions found on the tub.
- Stir well to a smooth consistency.
- Apply using a filling tool such as a filling knife, trowel, or float.
- Apply in sweeping strokes. Gentle smooth off with a clean, wet tool, cleaning the tool between strokes.
- Prior to being fully dry, once the surface is firm, re-wet, and polish with a clean tool for a smooth finish.
- Allow at least 24 hours to dry and sand smooth if necessary.
